欧式插头(无接地)
欧式插头(无接地)
线型图

欧式插头(无接地)
实物图

欧式插头(无接地)
插头、插座

欧式插头(无接地) Europlug

  • AENOR认证
  • CEBEC认证
  • CEP认证
  • FIMKO认证
  • IMQ认证
  • KEMA认证
  • LCIE认证
  • Nemko认证
  • OVE认证
  • SEMKO认证
  • SEV认证
  • VDE认证


电气参数
电流:2.5A 电压:230V 频率:50Hz
简 介

        欧式插头(无接地)制造标准按CEE 7/16 标准执行。两圆柱无接地,跨距为19mm,圆柱直径4mm,在大部分欧洲国家使用:德国、奥地利、瑞士、意大利、荷兰、比利时、法国、西班牙、葡萄牙、丹麦、挪威、瑞典、芬兰、希腊、土耳其、以色列、波兰、捷克共和国、斯洛伐克、匈牙利、罗马尼亚、保加利亚和俄罗斯。也用于中东,大多数非洲,南美和许多发展中国家。所有要进入欧盟国家的进口设备都要严格按照欧盟标准对电源线和插头插座进行CE认证,这是必须的、强制的。

注:欧洲标准墙壁插座也通用此标准。

       法国标准的插头接地是单级嵌入式,插座上有凸出的接地插脚,非常特殊。


 


Electrical parameters:
Current:2.5A Voltage:230V Frequency:50Hz
Introduction

The standard 2-wire plug used in Class II, ungrounded, applications is popularly known as the Europlug, which is described in CEE 7/16. It will mate with any socket that accepts 4.0–4.8mm round contacts on 19mm centers. Countries that use the Europlug: Germany, Austria, Switzerland, Italy, the Netherlands, Belgium, France, Spain, Portugal, Denmark, Norway, Sweden, Finland, Greece, Turkey, Israel, Poland, the Czech Republic, Slovakia, Hungary, Rumania, Bulgaria, and Russia. Also used in the Middle East, most of Africa, South American and many developing nations.

This plug is generally limited for use in applications that require 2.5A or less. It is also unpolarized.

The Europlug power cord and cordset are designed for high-volume, end-consumer applications. If your application is above 2.5A, you should specify a Continental European power cord or cordset.

Note: The Europlug mates with all standard wall sockets used in Continental Europe.